Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2009
    Location
    Spring Valley Il
    Posts
    169

    Default Carb boot / rubber flange needed

    Looking for the rubber flange between the carb and intake. Manual calls it a carb flange. 34vm mikuni going on a 1978 Ski Doo TNT 440 fan cooled. Text 815 -303-9009. Thanks

  2. #2
    Join Date
    Dec 2009
    Location
    Baudette, MN
    Posts
    1,929

    Default

    Very cool that you're still plugging away at the vintage iron over the summer. My progress has slowed over the summer but some things are still getting done.

    According to the specs, this should fit but just to be safe, measure the bolt spacing on the intake (center-to-center). If it's 2 15/16" you're good to go. If not, there are other flanges that have different bolt spacings and the right one can usually be found once you know the spacing you need.

    https://www.mfgsupply.com/snowmobile.../07-469-1.html

  3. #3
    Join Date
    Dec 2009
    Location
    Spring Valley Il
    Posts
    169

    Default

    Going to post pics as soon as time allows and I figure out how. These sleds are in amazing shape for the year. Thanks skiroule

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» John Dee

» July 2020

S M T W T F S
282930 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31 1

» Stats

Members: 20,277
Threads: 28,593
Posts: 339,009

» Online Users: 398

3 members and 395 guests
Most users ever online was 2,946, 07-12-2019 at 01:11 AM.

» Today's Birthdays

None
Powered by vBadvanced CMPS v4.3.0