Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2009
    Location
    Huntley, IL
    Posts
    94

    Default Carburetor Installation

    I am reinstalling my carburetor after having it cleaned out of my 2005 Renegade and am having a heck of a time getting the fuel line reconnected. It has to plug into that black fitting that swivels forward and back and is too tight to get on. Any recommendations?

  2. #2
    Join Date
    Dec 2009
    Location
    Island Lake & LandoLakes
    Posts
    495

    Default

    I have used these in many tight place while working on a sled.
    https://www.harborfreight.com/3-piec...ers-37909.html

  3. #3
    Join Date
    Dec 2009
    Location
    Hortonville, Wi
    Posts
    8,166

    Default

    Sure the fuel line is still routed the same way? Maybe you pushed it around and looped it around something upon installation making it “shorter”

  4. #4
    Join Date
    Dec 2009
    Location
    Island Lake & LandoLakes
    Posts
    495

    Default

    On my gade I take that hose off just to lift the carbs up to get access to the bowl screw to drain it. I just hate it when I put the air box back in and remember that I did not slide the clamp back. This specific hose does not have much slack.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» John Dee

» July 2020

S M T W T F S
282930 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31 1

» Stats

Members: 20,277
Threads: 28,586
Posts: 338,969

» Online Users: 51

2 members and 49 guests
Most users ever online was 2,946, 07-12-2019 at 01:11 AM.

» Today's Birthdays

None
Powered by vBadvanced CMPS v4.3.0