Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2009
    Location
    Cloquet, MN
    Posts
    1,074

    Default sportsman 500 electrical issue

    I have a 2013 Sportsman 500 that I was adding handwarmers to. Got them all wired in, used the power and ground connected to the 12 volt auxilary plug as my power source. Hooked the wiring up to the switch before i actually drilled the hole and mounted the switch to make sure it worked. Everything worked fine at that point, bars got warm, all was good. Then I drilled the hole in the console, disconnected the wiring to the switch, mounted the switch, plugged the wires back in, reassembled the headlight pod, went to fire it up and had absolutely no power. ATV was dead as a door knob, no lights, no nothing. Battery is fully charged, nothing. Disassembled head light pod, disconnected hand warmer wiring and still dead.

    Is there a fuse or something I may have blown? And why if it worked fine at one time, what would've caused a fuse or something to go?

    Thanks in advance!

  2. #2
    Join Date
    Dec 2009
    Location
    Cloquet, MN
    Posts
    1,074

    Default

    Got it figured out. I did blow a fuse. Ended up having to disconnect the 12 volt auxilary plug. Don't think I should have had to but it worked for me and I never used it anyways.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» John Dee

» December 2019

S M T W T F S
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31 1234

» Stats

Members: 20,184
Threads: 27,725
Posts: 328,149

» Online Users: 170

9 members and 161 guests
Most users ever online was 2,946, 07-12-2019 at 02:11 AM.

» Today's Birthdays

roam (40)
Powered by vBadvanced CMPS v4.3.0