Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2015
    Location
    xxx
    Posts
    6

    Default Help with Rupp American

    I have a 1972 or 1973 Rupp American 40hp that I need the drive and idler cogs for. Internet searches have proved these are difficult to obtain. Does anybody have a source for them or have a tooth count and outer diameter so I could have some fabricated? They're hard plastic and mine are completely gone, so I have nothing to go by. Thanks for any help

  2. #2
    Join Date
    Dec 2009
    Location
    Baudette, MN
    Posts
    1,929

  3. #3
    Join Date
    Dec 2015
    Location
    xxx
    Posts
    6

    Default

    Thank you skiroule for the link! I've looked on ebay but never found these. That's likely the route I'll go. Much appreciated

  4. #4
    Join Date
    Dec 2009
    Location
    Baudette, MN
    Posts
    1,929

    Default

    No problem. Good luck with your project! Didn't see many Rupps back in the day in my area but always thought they were cool sleds.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» John Dee

» July 2020

S M T W T F S
282930 1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31 1

» Stats

Members: 20,277
Threads: 28,590
Posts: 338,980

» Online Users: 65

10 members and 55 guests
Most users ever online was 2,946, 07-12-2019 at 01:11 AM.

» Today's Birthdays

None
Powered by vBadvanced CMPS v4.3.0